What faults are most likely to occur in the glass reactor?
According to the feedback from users, the glass reaction kettle manufacturer zhengzhou keda summarized the following points:
1. The power indicator is not bright;
2. Short circuit of insurance tube;
3. No vacuum;
There is a vacuum.
5. Rotation axis does not rotate;
6. Vacuum hose aging;
7. The main spindle is loose;
The temperature of the motor is too high.
The above is the most vulnerable fault of the glass reaction kettle. The troubleshooting method is as follows:
1. Check the power and socket to see whether the external power supply is not connected or the contact is not good;
2. Turn off the power switch and replace the insurance pipe;
3. Check the glass parts and switches, which are damaged and replaced;
4. The sealing ring is worn out and the sealing ring is changed.
The switch has a problem, switch the switch;
5. The rotation axis is rusted, contacting the manufacturer in time to stop the use of the glass reaction kettle;
Change a new vacuum hose;
7. Tighten screws;
8. Remove the dirt from the glass shaft and the sealing ring, apply the vacuum grease, and reduce the load of the motor;
The fault of the glass reactor is easy to occur and the method of elimination is corresponding. The glass reaction kettle manufacturer also produces the circulating water vacuum pump and rotary evaporator.